Oxygen ORDERCODE D2150
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio Oxygen brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio Oxygen™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. 2 2 3 Description..…..............................................................................……….………………………………… Features………………………………………………………………………………….………………….…. Overview ..…………………………………………………………………………………….………....……. Frontside.
WARNING CAUTION! Keep this system away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this system has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • Make sure you don’t use the wrong kind of cables or defective cables. Make sure that the signals into the mixer are balanced, otherwise hum could be created. Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear. Make sure that the available voltage is not higher than stated on the rear panel. Make sure that the power-cord is never crimped or damaged. Check the system and the power-cord from time to time.
Description of the device Features The Oxygen is a mixer from Dap Audio.
Frontside 1) Line 1 /Line 2 + Peak Indicator 2) Mic 1 3) Gain range for Mic +10 / +60 dB; range for Line -10 / +40 dB 4) EQ Hi, range -15 / +15 dB 5) EQ Mid, range -15 / +15 dB 6) EQ Low, range -18 / +18 dB 7) Balance 8) PFL (Pre Fade Listening) 9) Channel 1-7 Fader 10 LED VU meter 11) Master 1 Fader 12) Master 2 Fader 13) ON / OFF 14) Master 1 Stereo / Mono 15) Master 2 Stereo / Mono 16) VU Meter Master 1/ Master 2/ PFL 17) Effect-PFL Level, range / +6 dB 18) Effect-PFL ON/OFF 19) Booth, range / +6 dB
Backside Fig.
Installation Remove all packing materials from the Oxygen. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. 1. Line 1 /Line 2 + Peak LED You can switch between Line 1 or Line 2 2. Mic 1 3. GAIN Mic Channel input level is determined by the Gain control.
volume fader setting is not recognized (PRE FADER LISTEN). Once a PFL button is pressed, the master display automatically enters PFL/PGM mode. This allows you setting a signal’s correct level or making special EQ-adjustments without the need of including it in the main mix. 9. Channel Fader A high-quality true logarithmic 100mm fader, which controls the volume of a single channel and to establish an accurately proportioned mix of all input signals.
13. ON / OFF 14. Master 1 Stereo / Mono You can switch between Master 1 Stereo or Master 1 Mono. 15. Master 2 Stereo / Mono You can switch between Master 2 Stereo or Master 2 Mono. 16. VU Meter Master 1/Master 2/ PFL You can switch between Master 1, Master 2 or PFL 17. Effect-PFL ON/OFF 18. Effect-PFL You can change the Effect level. 19. Booth You can change the volume of the DJ Booth with this knob. 20. PFL / Master + PFL 21. Phones This control allows you to adjust the headphones’ volume.
Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems (faulty contacts, ground hum, discharges, etc.
Maintenance The DAP Audio Oxygen requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specification Model: DAP Audio Oxygen Power Dimensions Weight AC 230V-50Hz (CE) 480 x 355 x 110 mm (LxWxH) 7,46 Kg Inputs 7x Microphone (XLR balanced) 11x Stereo Line (2x gold-platet RCA unbalanced) 3x Stereo Phono with faderstart (2x gold-plated RCA unbalanced) 1x Effect return (2x RCA unbalanced) +48V Phantom Power (optional; default = OFF; just change jumper position for ON) Mic Input Frequency response Distortion (THD & N) electronically balanced 10 Hz to 60 KHz ±3 dB 0.
2006 Dap Audio.
