Product guide

4
 The residence time of persons in smoke-filled rooms with less than 15 m of sight must never exceed
5 minutes.
 The fog vapour at point of release is under pressure and is extremely hot.
 The output nozzle becomes very hot during operation (300 degrees C). Keep flammable
materials at least 50 cm away from the nozzle.
 The use of smoke-fluid is only allowed for adults.
 Repairs, servicing and electric connection must be carried out by a qualified technician.
 In dense, smoke-saturated surroundings, the oxygen portion is substantially reduced!
 The smoke density must be portioned in a way that the sight will always be above 5 m - Danger of
anxiety state due to missing orientation!
 The user is responsible for correct positioning and operating of the Atmos F-350. The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this device.
 Every smoke-filled room must be overseen by a skilled person.
 WARRANTY: Till one year after date of purchase.
Operating instructions:
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 0,5 meters.
The maximum ambient temperature t
a
= 45°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, explosion, crash etc.
You endanger your own safety and the safety of others
Improper installation can cause serious damage to people and property !
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
 If the fazer is lowered from the ceiling or high joists, professional trussing systems have to be used.
 Use a clamp to mount the fazer, with the mounting-bracket, to the trussing system.
 The fazer must never be fixed swinging freely in the room.
 The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
 When rigging, derigging or servicing the fazer, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Atmos Fazer can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Improper installation can cause serious damage to people and property !