Atmos F-350 ORDERCODE 60880 Highlite International B.V.
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Atmos F-350 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Atmos F-350™ Product Guide Warning.................................................................................…...……………..…………………………….…………. Safety-instructions………………………………………………………………………………………………………. Operating Determinations.…………………………………………………………………………………………… Rigging.…………………………………………………………………………………………………………………… Return Procedure……………………………………………………………………………...................................... Claims…………………………………………………………………………….........................................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device. Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact.
The residence time of persons in smoke-filled rooms with less than 15 m of sight must never exceed 5 minutes. The fog vapour at point of release is under pressure and is extremely hot. The output nozzle becomes very hot during operation (300 degrees C). Keep flammable materials at least 50 cm away from the nozzle. The use of smoke-fluid is only allowed for adults. Repairs, servicing and electric connection must be carried out by a qualified technician.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable Pin L BROWN RED YELLOW/COPPER FASE N BLUE BLACK SILVER NUL YELLOW/GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device Features The Atmos F-350 fazer is a versatile and powerful fazer from Showtec. • Create a thin haze of fog • Peak Power 730 Watt; Continuous Power 700 Watt • 1000 W Heater • Warm-up time approx. 3 min. • Fog output 2000cu.ft/min. • Tank Capacity: 1,5 L.
Backside 4 5 6 7 8 9 10 11 Fig. 2 4) 1,5 L Liquid tank 5) ON/OFF 6) 5-pin Wireless remote control input; also works with 50333 MKII Use FL513 as connection cable for connecting to 50333 7) 3-pin DMX In 8) Fuse 10A / 250V 9) 3-pin DMX Out 10) AC 220~240V 11) DMX Dip Switches + DMX LED, blinks when DMX signal is present Installation Installing the Fazer Remove all packing materials from the fog machine. Check that all foam and plastic padding is removed, especially in the nozzle area.
Control Modes There are 2 ways to control the fazer: 1) Wireless remote control (stand-alone) 2) DMX512 (1 Channel) Wireless remote control 1. You can use the Atmos F-350 with a wireless remote control. 2. Be sure to plug the receiver into the connector (6) on the backside of the fazer. 3. Just press one of the two buttons to start fogging, both buttons have the same function. Multiple Atmos fazers (DMX Control) 1.
After switching on, the Atmos fazer will automatically detect whether DMX 512 data is received or not. If there is no data received, the problem may be: - The XLR cable from the controller is not connected with the input of the Atmos fazer. - The controller is switched off or defective, the cable or connector is detective, or the signal wires are swapped in the input connector.
10
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. Important: Fixtures on a serial data link must be daisy chained in one single line.
Performance Notes • All fog machines develop condensation around the output nozzle. Because this may result in some moisture accumulation on the surface below the output nozzle, consider this condensation when installing your unit. • Fog machines may sputter small amounts of fog occasionally during operation and for a minute or so after being turned off. • All fog machines have a recycling period after bursts of fog, when the machine will shut itself down for a short period in order to heat back up.
Problem One or more fixtures are completely dead. Fixtures reset correctly, but all respond erratically or not at all to the controller. Probable cause(s) No power to the fixture Remedy · Check that power is switched on and cables are plugged in. Primary fuse blown. · Replace fuse. The controller is not connected. 3-pin XLR Out of the controller does not match XLR Out of the first fixture on the link (i.e. signal is reversed). · Connect controller.
Product Specification Model: Showtec Atmos F-350 Fazer Voltage: AC 230V-50Hz (CE) Power consumption: 1000W(230V) 1000 W Heater Warm-up time approx. 3 min. Fog output 2000cu.ft/min. Tank Capacity: 1,5 L.
