Product guide

15
Loop play
• Push the in/beat loop (7) button to set the loop start point the button will start blinking.
• Push the out/reloop (26) button to set the loop end point. After the end point is set, the playback will
enter the loop play from start point to end point repeatedly. Both the in/beat loop (7) button and the
out/reloop (26) button will blink.
• Tap the out/reloop (26) button to cancel the loop play. Both the in/beat loop (7) and out/reloop (26)
buttons will dim.
• Pushing and holding the shift (29) button while tapping the out/reloop (26) button while in loop play,
allows you to change the endpoint by dialing the Jogwheel (9). The out/reloop (29) button will blink
while the in/beatloop (7) button will dim. Confirm the new endpoint by pushing and holding the shift
(47) button while tapping the loop out/reloop (29) button. Both the in/beatloop (7) button and the
out/reloop (26) button will blink again, indicating loop play is active.
• Pushing and holding the shift (29) button while tapping the in/beatloop (7) button while in loop play,
allows you to change the startpoint by dialing the Jogwheel (9). The in/beatloop (7) button will blink
while the out/reloop (29) button will dim. Confirm the new endpoint by pushing and holding the shift
(29) button while tapping the loop in/beatloop (7) button. Both the in/beatloop (7) button and the
out/reloop (26) button will blink again, indicating loop play is active.
• The 1 (4), 2 (15), 3 (22), 4 (23) buttons and the x2/shift (25) and x½/shift (6) buttons allow you to
shorten or expand the length of the recorded loop while loop play is active.
• While pushing and holding the shift (29) button, the x2/shift (25) and x½/shift (6) buttons allow you to
shift the recorded loop with 1 beat while loop play is active.
Beat loop play
• Hold the shift button while pushing the loop in/beatloop (7) button.
• Set the loop length using the x2/shift (25) and x½/shift (6) buttons. Smartloop play will start
immediately.
• Pushing the out/reloop (26) button will cancel smart loop play.
Reloop
• Push and hold the shift (29) button and tap the out/reloop (26) button. The song will return to the last
selected loop.
• Push the out/reloop (26) button, the loop play function is canceled.
Recording a sample
• Activate sampler mode by pushing the samples (14) button. The samples (14) button will light and the
sampler panel will open.
• Choose a memory space in which you want to store your new sample.
Deck 1: 1 (3) button = sample 1 Deck 2: 1 (3) button = sample 5
2 (2) button = sample 2 2 (2) button = sample 6
3 (15) button = sample 3 3 (15) button = sample 7
4 (16) button = sample 4 4 (16) button = sample 8
• While holding the shift (29) button push the corresponding sample button to start recording.
• When finished recording, push the sample button again (release the shift (29) button).
Sample playback
• If not in sampler mode, activate sampler mode by pushing the samples (14) button. The sampler
panel will open.
• Push the corresponding sample button to toggle playback/pause of the sample.
Deck 1: 1 (3) button = sample 1 Deck 2: 1 (3) button = sample 5
2 (2) button = sample 2 2 (2) button = sample 6
3 (15) button = sample 3 3 (15) button = sample 7
4 (16) button = sample 4 4 (16) button = sample 8