User manual

10
IMIX 7.1
Ordercode: D2350
30. Power adapter connector
This is the remote AC power supply input socket for the IMIX-7.1. It is a special three core socket. Please
use the supplied DAP audio adapter only.
31. Power on/off switch
Do not supply power before the whole system is set up and connected properly.
32. With/ without mic switch
Use this switch if you don’t want your microphone signal(s) at the rec outputs (42).
33. Channel 5 gain control
Channel 5 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
34. Channel 4 gain control
Channel 4 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
35. Channel 3 gain control
Channel 3 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
36. Channel 2 gain control
Channel 2 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
37. Channel 1 gain control
Channel 1 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
38. Mic 2 combo input connector
Depending on what’s most suitable in a given situation, you can use the Combo input at the front or the
rear. Both inputs are wired in parallel so you can even use them to link through.
39. Mic 1 combo input connector
Depending on what’s most suitable in a given situation, you can use the Combo input at the front or the
rear. Both inputs are wired in parallel so you can even use them to link through.