User manual

ManualsBrandsDAPAudio ManualsAudio MixerIMIX-7.1

IMIX 7.1

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: D2350

MANUAL

ENGLISH

Summary of content (16 pages)

PAGE 1
MANUAL ENGLISH IMIX 7.1 Ordercode: D2350 Highlite International B.V.
PAGE 2
IMIX 7.1 Table of contents Warning ...............................................................................................................................................................................2 Unpacking Instructions .................................................................................................................................................2 Safety Instructions .............................................................................................................
PAGE 3
IMIX 7.1 Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
PAGE 4
IMIX 7.1 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system.                              Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact.
PAGE 5
IMIX 7.1 Operating Determinations This system is not designed for permanent operation. Consistent operation breaks will ensure that the system will serve you for a long time without defects. If this system is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void. Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
PAGE 6
IMIX 7.1 Description of the device Features The IMIX-7.1 is a compact installation mixer for many kind of applications. It has a basic design which makes it easy to control. Gain settings are at the backside which prevents wrong use by non-technical users. The 3 balanced master outputs each with low, mid and high tone controls make it possible to set up different sound levels for 3 areas.
PAGE 7
IMIX 7.
PAGE 8
IMIX 7.1 Functions 1. Mic input connector Electronically balanced combo-type input for connecting low impedance microphones. The input has extremely low noise and low hum. When connecting a microphone make sure that the pin assignment is correct. Always make sure to read the manual of the microphone you want to connect. The XLR- input is not suitable for connecting an additional mixing console, FXunit, etc. You have to use the line (48-52) inputs, when connecting this kind of equipment.
PAGE 9
IMIX 7.1 12. Phono-line 1 LED Indicates that the phono-line 1 input is selected. 13. Phono-line 1 LED Indicates that the line 2 input is selected. 14. Input Selection button (Line 1/Line 2) With this button you can select between two sets of inputs per channel. 15. Peak LED The peak LED shows signal peaks in a channel’s incoming signal.
PAGE 10
IMIX 7.1 18. Master control (master 1- 3) You can adjust the output signal to the Master Outputs (42, 43, 44, 45, 46, 47) outputs. 19. Output Signal VU Meter (master 1, 2) This meter is a multi-step LED. The accurate level indication allows you to monitor the output signal level at any time, and match with other devices. 20. Ratio control Use this control to make a headphone mix between your PFL and your master signal. 21.
PAGE 11
IMIX 7.1 30. Power adapter connector This is the remote AC power supply input socket for the IMIX-7.1. It is a special three core socket. Please use the supplied DAP audio adapter only. 31. Power on/off switch Do not supply power before the whole system is set up and connected properly. 32. With/ without mic switch Use this switch if you don’t want your microphone signal(s) at the rec outputs (42). 33. Channel 5 gain control Channel 5 input level is determined by the gain control.
PAGE 12
IMIX 7.1 40. Channel 2 line/phono switch Used to set the input level for the channel 2 phono-line (51) input for either phono or line level. 41. Channel 1 line/phono switch Used to set the input level for the channel 1 phono-line (52) input for either phono or line level. 42. Record RCA unbalanced out connectors Use these to connect a recording device. 43. Master 3 RCA unbalanced out connectors Use these outputs to connect an amplifier with unbalanced inputs. 44.
PAGE 13
IMIX 7.1 Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa. Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables.
PAGE 14
IMIX 7.1 Troubleshooting DAP Audio IMIX-7.1 This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. 1. 2. 3. 4. 5. If the device does not operate properly, unplug the device. Check power from the wall, all cables, connections, etc. If all of the above appears to be O.K., plug the unit in again.
PAGE 15
IMIX 7.