User manual

10
IMIX 5.3
Ordercode: D2352
30. Power adapter connector
This is the remote AC power supply input socket for the IMIX-5.3 It is a special three core socket. Please
use the supplied DAP audio adapter only.
31. Zone C XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
32. Zone B XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
33. Zone A XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
34. Zone C RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
35. Zone A RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
36. Zone B RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
37. Channel 4 RCA line input connectors
Use to connect a line level device. You can select one of the two line inputs with the corresponding input
selection (11) switch on the frontpanel.
38. Channel 3 RCA line input connectors
Use to connect a line level device. You can select one of two the Line inputs with the corresponding
input selection (11) switch on the frontpanel. Use the phono input to connect a turntable
39. Channel 2 RCA line/phono input connectors
Use the line input to connect a line level device. Use the phono input to connect a turntable.
40. Channel 1 RCA line/phono input connectors
Use the line input to connect a line level device. Use the phono input to connect a turntable.
41. GND screw
Use to connect the ground wire of your turntable.