DS-CM-10 ORDERCODE D2183
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio DS-CM-10 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Dap Audio Dap Audio DS-CM-10™ Product Guide Warning....................................................................................................................................................................... 2 Safety-instructions................................................................................................................................................. 2 Operating Determinations...................................................................................................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Never leave any cables lying around. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International L N EU (including UK) From April 2004 Brown Blue Green/Yellow North America Pin Black White Green Phase Neutral Protective Earth Make sure that the device is always connected properly to earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device Features • 11 inputs • 3 outputs • Assignable cross fader • Gain, bass, mid, treble, pan control for each channel • Headphone with split function • Zone output with equalizer Overview Front Fig.
Backside Fig.
5. MIC 1 Volume Controls the volume of the Mic 1 (6) input. 6. MIC Electronically balanced XLR-type input for connecting low impedance microphone. The input has exremely low noise hum. When connecting a microphone make sure that the pin assignment is correct. Always make sure to read the manual of the microphone you want to connect. The XLR- input is not suitable for connecting an additional mixing console, FX- unit, etc. You have to use the LINEinputs, when connecting this kind of equipment.
21. X-assign B Use this switch to assign the Left-side of the crossfader (20) to an input channel (zero is Off). 22. Fader Start B This switch activates the fader start function for the channel selected by X-assign B (21). 23. Output L Signal VU Meter This meter is a multi-step LED; respectively the green LEDs show -40, -30, -20, -10, -7, -4 and -2dB. The red LEDs show +0, +2, +4, +7 and +10dB.
Fig.6 37. GND Use to connect the ground wire of your turntable. 38. GND Use to connect the ground wire of your turntable. 39. AC Inlet This connector is meant for the connection of the supplied main cord. Connect one end of the power cord to the connector, the other end to the mains, then turn on the power switch to operate the unit. Note: Please make sure that the supply voltage matches the operation voltage before connecting the unit to mains. 40.
Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables.
Compensation of interference with balanced connections Maintenance The DAP Audio-CD-Player DS-CM-10 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting DAP Audio-CD-Player DS-CM-10 This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. 1. If the device does not operate properly, unplug the device. 2. Check power from the wall, all cables, connections, etc. 3. If all of the above appears to be O.K., plug the unit in again. 4.
Product Specification • Model: • Power: • Light: • Weight: • Dimensions (WxHxD): DAP Audio DS-CM-10 100 – 240 V~, 50/60 Hz, 29W BNC, 12 Volt, max. 5W 2.8 kg 483 x 180 x 100 mm Input Sensitivity: • Microphone 1: • Microphone 2: • Phono: • Aux: • Line: -54dBu, 2 mV at 2.2 kΩ -60dBu, 1 mV at 2.2 kΩ -50dBu, 2.5 mV at 47 kΩ at 1 kHz.
Design and product specifications are subject to change without prior notice. Website: www.Dap-audio.info Email: service@highlite.
2009 Dap Audio.