Product guide

15
Installation
Remove all packing materials from the Entertainer mobile set active. Check that all foam and plastic
padding is removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the back of the device.
Do not attempt to operate an 115V specification product on 230V power, or vice versa.
Connections
1. Turn off the Power switch.
2. Connect the Entertainer Mobile Set Pro to your other devices you plan on using.
CAUTION: Be sure that the power is off, when connecting the cables.
DVD/CD Operations
Preparation
• When you want to watch a DVD film, switch the TV-set on and select the video input connected to
the DVD player.
• If you want to listen to audio via your audio installation, switch the audiosystem on and select the
DVD player input.
Normal Playback
1. Press standby at the front panel to switch the DVD player on. The start logo appears on the TV
screen. If the disc drive already contains a disc, the playback will start as soon as the DVD player is
switched on.
2. Press the Eject (45, 93) button to open the disc drive and insert a disc.
3. Press the Eject (45, 93) button to close the disc drive. Playback will start.
4. Press the Play/Pause (47, 78) button if the playback does not start automatically.
5. Some discs will start by presenting a menu. Use the Arrow (83) buttons to choose between the different
options, then press the Enter (82) button. Alternatively, you can enter the number of the function in
question using the Number (94) buttons.
Pause
1. Press Pause (79) on the remote control or Play/Pause (47) on the frontpanel to stop
playback (still picture). The sound will be deactivated in still mode.
2. Press Pause (79) on the remote control or Play/Pause (47) on the frontpanel to resume
playback.
Stop
1. Press the Stop (44, 98) button on the remote control to stop playback. The start logo will appear on
the TV screen. Some discs offer the possibility of resuming from the same spot, e.g. DVD’s and music
CD’s.
2. Press Play (78) on the remote control or Play/Pause (47) on the frontpanel to resume
playback from where the playback was stopped or from the beginning depending on the DVD.
3. Press the Stop (44, 98) button twice to stop the playback completely.
Previous/ Next
During playback, press Previous (48, 88) to return to the start of the track. Press Previous (48, 88)
again to go back to the previous. Each time you press the Next (49, 103) button you will skip to the
next track.