Product guide

12
Frame search
Frame search is a function for monitoring the sound at a certain section of the disc and manually
Changing the position. Searching is used to set a starting point with precision.
• Dial the jogwheel (14) while in pause mode or cue mode to start searching. The sound of one
revolution of the disc is put out repeatedly. The point at which the sound starts is indicated on the LCD.
• While dialing the jogwheel (14), the point from which the sound output moves is the a number of
Frames corresponding with the number of milliseconds, and the time display in the LCD display (13)
also changes.
• The search point moves in the forward direction by dialing the jogwheel (14) clockwise and backwards
by dialing the jogwheel (14) counterclockwise.
Scanning (fast forward/fast backwards)
Scanning is a function for moving quickly forward or backward while dialing the Shuttle wheel (14).
1. Push the search (15) button to neter search mode. The LCD display (13) will show SEARCH.
2. Dial the jogwheel (14) to start scanning. The disc moves rapidly forward or backward and the sound is
audible. The current scan point is indicated on the LCD.
3. Dial the jogwheel (14) clockwise to scan in the forward direction, counterclockwise to scan in the
reverse direction.
4. Push the search (15) button again to exit search mode. SEARCH will disappear from the LCD display
(13).
Time display
Push the time (4) button to select time display mode:
• Elapsed time of a track (ELAPSED).
• Remaining time of a track (REMAIN).
• Remaining time of the disc (TOTAL REMAIN). This display mode can only be activated if a disc is
formatted as CD.
Changing pitch
There are three tools available for matching the BPM of the CD:
• Use the pitch control fader to adjust the BPM.
1. Set the desired pitch bend range for the pitch control fader by pushing the pitch (10) button. Make
Sure that the pitch control fader is not deactivated (range = off).
2. Adjust the BPM by sliding the pitch control fader (11) up or down.
3. Slide the pitch control fader (11) up to decrease BPM, or down to increase BPM. The adjustment range
is +/- 8%, 16% or 100% depending on the range, set up with the pitch (10) button.
• Use the pitch bend buttons to change the BPM temporarily.
1. The BPM increases or decreases respectively while the pushing the pitch bend + (26) or pitch bend –
(25) buttons.
2. The BPM increase depends on how long you hold the button. If you hold the button for about 5
seconds, the BPM will go either to + 16% (depending on the setting with the pitch (10) button) for pitch
bend + (26) or - 16% for pitch bend – (25). If you tap the button, the BPM will only change a little so you
can change the beat slightly without an audible change in the music.
3. The CD will return to the BPM set with the pitch control fader (11) when you release the pitch bend +
(26) and pitch bend – (25) buttons.
• Dial the jog wheel while not in search mode or scratch mode to change the BPM temporarily.
1. Rotate the jogwheel (14) clockwise during play to increase the BPM and counterclockwise to
decrease the BPM. The faster you turn the wheel, the more the BPM changes. The adjustment
range is +/- 16% depending on the range, set up with the pitch (10) button.
2. When you release the jogwheel (14), the track will return to the BPM set with the pitch control fader
(11).