Use and Care Manual

3
MSDS No.: 00079946005
Clean Up & Storage:
Wash tools immediately after use with soapy water. Dried material will have to be cut or scraped away.
Be sure container is closed and tightly sealed. Store in a cool, dry place.
Safety:
WARNING! IRRITANT. May be harmful if inhaled. May cause eye, skin and respiratory irritation.
Harmful if swallowed or absorbed through the skin. Do not breathe vapors or dust. Use only with
adequate ventilation. Prevent build‐up of dust and vapor by opening windows and doors or use other
means to ensure fresh air entry during application, drying and sanding. Wet sanding is recommended to
reduce dust exposure. Dry sanding of this product may generate dust. Inhalation of dust may cause lung
damage or other adverse pulmonary and respiratory effects. When sanding, wear a NIOSH‐approved
dust mask. Follow dust mask manufacturer’s directions for use. Keep exposure below OSHA
permissible exposure limits. Avoid contact with eyes, skin and clothing. Wear gloves and safety glasses.
Close container after use. Wash thoroughly after handling. WARNING: This product contains
chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
FIRST AID: SKIN: Wash thoroughly. EYE: immediately flood with large quantities of water.
INHALATION: Remove to fresh air. INGESTION: DO NOT INDUCE VOMITING. Get medical
attention if complications arise from any exposure. For emergencies, call your poison control center at
1‐800‐222‐1222. See Safety Data Sheet (SDS) for additional information. See product label and Safety
Data Sheet (SDS) for additional safety information. You can request an SDS by visiting
phenopatch.com or calling 1-888-327-8477.
SATISFACTION GUARANTEED:
If product fails to perform when used as directed, return used container & sales receipt to
PHENOMENAL BRANDS, Technical Customer Service, 2400 Boston St., Ste. 200, Baltimore, MD
21224 for replacement product or sales price refund. DAP is not liable for incidental or consequential
damages.