Technical Specifications
2
Surface Preparation & Application
1. Surface must be clean, dry and free of dirt, oil and loose material. De-gloss surface if necessary for
best adhesion.
2. Surface, wood filler and air temperature should be above 40F.
3. If staining, test wood filler with desired stain on scrap wood before filling to ensure desired stain
color. Stain before filling with wood filler, then use stain to develop desired final finish.
4. Stir product with putty knife before application. For squeeze tubes, knead the tube prior to cutting and
extruding material.
5. Apply wood filler into area to be filled. Press firmly into place using a putty knife or tool.
6. Avoid overspreading filler on surrounding surfaces. Overfill slightly to allow for sanding and
settling. Most repairs require just one fill. Larger and deeper holes may require more than one
application.
7. For larger and deeper holes, apply thin layers to build up thick sections. Allow wood filler to dry
before applying next layer.
8. Allow to dry thoroughly before sanding: approximately 3 to 6 hours for shallow fills up to 1/8” and
36 hours for deeper fills 1/4” and over. Sand with medium sandpaper.
9. May be painted with latex-based paint immediately after sanding, or after 12 hours if using an oil-
based paint.
10. Exterior applications must be coated with latex or oil-based paint or solid color stain.
11. Reseal container tightly with lid.
12. Keep from freezing.
Typical Physical & Chemical Characteristics:
Vehicle: Latex Polymer
Filler: Inert Pigment
Volatile: Water
Solids: 78.9% by weight
Odor: Mild
Consistency: Stiff Paste
Application Temperature Range: Above 40F
Drying Time: Depending on temperature and humidity: 3 to 6 hours in shallow fills
up to 1/8"; up to 36 hours in deep fills 1/4"and over.
Shelf Life: 12 Months
SDS No.: 00079200001
Clean-Up & Storage:
Wipe off excess filler from surface and tools with a damp cloth before material dries. Dried wood filler must
be sanded or scraped away. Reseal tightly with lid after each use. Store in a cool, dry place away from
extreme heat or cold
Safety:
See product label and Safety Data Sheet (SDS) for health and safety information. You can request an SDS
by calling 1-888-DAP-TIPS or visiting our website at dap.com.
Warranty Information:
If product fails to perform when used as directed within one year of date of purchase, call 1-888-DAP-TIPS,
with your sales receipt and product container available, for replacement product or sales price refund. DAP
will not be responsible for incidental or consequential damages.