SDS

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 01/04/13

DAP

Presto Patch

™

Wall Repair

 Permanent drywall repair

 Restores structural integrity of wall

 Makes repairs invisible

 Time saving solution

 Pre-cut for easy installation

 Porous drywall paper for permanent repair

Packaging: Product includes: Pre-cut drywall with drywall paper cover, Styrofoam stencil

Color: not applicable

UPC Number: 070798091559, 070798091573

Manufactured For:

Manufacturer: DAP Products Inc., 2400 Boston St., Suite 200, Baltimore, Maryland 21224

Usage Information: Call 1-888-DAP-TIPS or visit dap.com & click on "Ask the Expert".

Order Information: 800-327-3339

Fax Number: 410-558-1068

Product Description:

DAP® Presto Patch™ is a simple, structural and invisible solution for permanently repairing holes in drywall.

This product repairs up to 3 7/8” or 6 7/8” holes in standard ½” standard drywall. DAP

Presto Patch™

includes a pre-cut drywall circle with oversized taping paper attached and a foam template.

Suggested Uses:

For use with standard drywall. Not for use with lath or plaster. Do not install DAP

Presto Patch™ in

temperatures below 45F (7C) or above 85F (30C).

Performance Characteristics:

 Repairs holes up to 3 7/8” wide or 6 7/8” wide, depending on size of DAP

Presto Patch™

 Porous paper allows joint compound through to strengthen bonding

 Provides a permanent repair and restores the wall to its original integrity

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 01/04/13 DAP® Presto Patch™ Wall Repair       Permanent drywall repair Restores structural integrity of wall Makes repairs invisible Time saving solution Pre-cut for easy installation Porous drywall paper for permanent repair Packaging: Color: UPC Number: Product includes: Pre-cut drywall with drywall paper cover, Styrofoam stencil not applicable 070798091559, 070798091573 Manu
PAGE 2
Surface Preparation & Application: Suggested Additional Supplies: ± ½ pint of joint compound (not spackling), drywall saw, 6” putty knife, medium and fine sandpaper, and pencil. 1. Center the foam template provided around the damaged area, and trace the circle. 2. With a drywall saw, cut along the outside of traced circle. Do not cut deeper than the ½” drywall patch, in order to avoid any electric, gas, plumbing or framing behind the wall. 3.