MSDS

This Material Safety Data Sheet is available in American Spanish upon request.
Los Datos de Serguridad del Producto pueden obtenerse en Espanol si lo riquiere.
Emergency Overview: A(n) white to off-white paste product with a slight odor. WARNING! May cause eye, skin, nose,
throat and respiratory tract irritation. Harmful if swallowed or absorbed through the skin.
Refer to other MSDS sections for other detailed information.
Effects Of Overexposure - Eye Contact: May cause eye irritation.
Effects Of Overexposure - Skin Contact: Harmful if absorbed through the skin. May cause skin irritation.
Effects Of Overexposure - Inhalation: Harmful if inhaled, may affect the brain or nervous system causing dizziness,
headache or nausea.
Effects Of Overexposure - Ingestion: Harmful or fatal if swallowed. Ingestion may result in obstruction when material
hardens.
Effects Of Overexposure - Chronic Hazards:
Repeated or prolonged exposure may cause skin, respiratory, kidney and
liver damage. Prolonged and repeated skin contact may cause irritation and possibly dermatitis. NOTICE: Reports have
associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system
damage. Symptoms include: loss of memory, loss of intellectual ability and loss of coordination. Intentional misuse by
deliberately concentrating and inhaling the contents may be harmful or fatal.
The International Agency for Research on Cancer (IARC) has determined that crystalline silica in the form of quartz or
cristobalite that is inhaled from occupational sources is carcinogenic to humans (Group 1- carcinogenic to humans). Refer
to IARC Monograph 68, Silica, Some Silicates and Organic Fibres (published in June 1997) in conjunction with the use of
Material
Safety
Data
Sheet
24 Hour Emergency Phone Numbers:
Medical/Poison Control:
In U.S.: Call 1-800-222-1222
Outside U.S.: Call your local poison
control center
Transportation/National Response
Center:
1-800-535-5053
1-352-323-3500
NOTE: The National
Response
Center
emergency numbers to
be used only in the event of chemical emergencies involving a
spill, leak, fire, exposure or accident involving chemicals.
IMPORTANT:
Provide this information to employees, customers, and users of this product. Read this MSDS before handling or disposing of
this product. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance with
requirements of this standard. All abbreviated terms used in this MSDS are further described in Section 16.
Section 1 - Chemical Product / Company Information
Product Name: Alex Flex Premium Molding & Trim Sealant Revision Date: 12/11/2012
Product UPC Number: 070798185425 Supersedes: New
Product Use/Class: Caulk MSDS Number: 00010124001
Manufacturer: DAP Products Inc.
2400 Boston Street Suite 200
Baltimore, MD 21224-4723
888-327-8477 (non-emergency matters)
Section 2 - Hazards Identification
Page
1
of
6
00010124001English