Technical Specifications

7/25/2019
Typical Uncured Physical Properties
Appearance/Consistency
Smooth, gunnable paste
Base Polymer
Synthetic rubber
Filler
Not applicable
Volatile
Aliphatic and aromatic solvents
Weight % Solids
50%
Density (lbs per gallon)
7.0
Odor
Strong solvent
Flash Point
39ºF
Freeze Thaw Stability (ASTM C1183)
Will not freeze
Shelf Life
12 months
Coverage
55 linear ft. at a 3/16" diameter bead size or 4 average
size windows
Typical Application Properties
Application Temperature Range
40ºF to 100ºF
Tooling Time (Working Time)
Do not tool or shape bead
Tack Free Time
10 minutes
Full Dry Through
7 days
Return to Service Time
12 hours
Vertical Sag (ASTM D2202)
0.15”
Typical Cured Performance Properties
Service Temperature Range
-20ºF to 122ºF
Water Ready Time
12 hours
Paint Ready Time
Painting not recommended
Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must
be cut or scraped away. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap
and water. Store container in temperatures below 80ºF and in a dry place.
TYPICAL PHYSICAL & CHEMICAL PROPERTIES
CLEAN UP & STORAGE