TDS

ManualsBrandsDAP ManualsPaint10.1 oz. Watertight Concrete Filler and Sealant

08/2018 | www.dap.com

DAP

Concrete & Mortar Siliconized

Filler & Sealant

DAP

CONCRETE & MORTAR FILLER & SEALANT is a ready-to-use, waterproof sealant formulated to

repair cracks and holes in concrete, mortar and masonry surfaces. It contains silicone additives for

improved adhesion, flexibility and water resistance. It forms a durable, 100% waterproof and weatherproof

seal. Resists gas, oil, grease and salt. Paintable. Easy to apply, low in odor and water clean-up.

VOC compliant. Interior/exterior use.

 Fills and seals cracks and holes in concrete surfaces

 Ready to use – needs no mixing or additives

 Provides a durable, long-lasting repair that is resistant to gasoline, salt, grease or oil when cured

 100% waterproof & weatherproof seal

 Excellent flexibility & adhesion

 Paintable

 Easy water clean-up

 Low odor

 VOC compliant

 Exterior/interior use

PACKAGING COLOR UPC

10.1 fl oz (300 mL) Cartridge

Gray 7079818021

PRODUCT DESCRIPTION

KEY FEATURES & BENEFITS

Summary of content (4 pages)

PAGE 1
DAP® Concrete & Mortar Siliconized Filler & Sealant PRODUCT DESCRIPTION DAP® CONCRETE & MORTAR FILLER & SEALANT is a ready-to-use, waterproof sealant formulated to repair cracks and holes in concrete, mortar and masonry surfaces. It contains silicone additives for improved adhesion, flexibility and water resistance. It forms a durable, 100% waterproof and weatherproof seal. Resists gas, oil, grease and salt. Paintable. Easy to apply, low in odor and water clean-up. VOC compliant. Interior/exterior use.
PAGE 2
SUGGESTED USES FILLING & SEALING CRACKS & GAPS IN:  Concrete surfaces  Patios  Steps  Above ground foundations     Concrete driveways Sidewalks Garage floors Pavements ADHERES TO:  Concrete  Mortar  Brick  Stone  Masonry      Cinderblock Stucco Wood – painted & unpainted Most metals Most building materials FOR BEST RESULTS        Apply in temperatures above 40F. Do not apply when rain or freezing temperatures are forecasted within 24 hours.
PAGE 3
5. After application, a more uniform fill or neater appearance may be obtained by tooling lightly with a trowel or putty knife. 6. Allow to cure 24 hours before direct exposure to water (longer in cooler and/or humid conditions). 7. Paintable after 2 hours (longer in cool or humid conditions) with latex or oil-based paints. 8. Clean up excess wet sealant with a damp sponge before it skins over. Excess dried sealant will need to be cut or scraped away. 9. Reseal cartridge for storage and reuse.
PAGE 4
CLEAN UP & STORAGE Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap. Store container in a cool, dry place away from extreme heat or cold. SAFETY See product label or Safety Data Sheet (SDS) for health and safety information. You can request a SDS by visiting our website at dap.com or calling 888-DAP-TIPS.