TDS

02/21/2021
• Lifetime Guarantee
USE FOR CAULKING AND SEALING:
• Windows
• Doors
• Siding
• Exterior Trim
• Baseboards
• Molding
• Gutters
• Flashing
• Pipes
• Vents
• Ducts
• Butt joints
• Corner joints
• Above ground foundations
ADHERES TO:
• Wood – painted & unpainted
• Vinyl
• Most plastics
• Aluminum
• Most metals
• Fiber cement
• Concrete
• Natural Stone
• Brick
• Glass
• Ceramic
• Fiberglass
• Drywall
• Plaster
• Stucco
• Most common building materials
• Application temperature range is between 0ºF and 140ºF.
• Joint width should not exceed ½”. If joint depth exceeds ½”, use foam backer rod.
• Not recommended for continuous underwater use, high temperature surfaces or for surface defects.
• Certain porous substrates, such as concrete, may require primer for best adhesion.
• Store below 80°F in dry place for optimal shelf life.
Surface Preparation
1. Surface must be clean, structurally sound and free of all foreign material.
2. Priming is not usually necessary; however, some circumstances or substrates may require a
primer. Priming is only required if testing indicates a need or where the sealant will be subjected to
constantly high levels of moisture after cure. It is the user’s responsibility to test substrate
compatibility and the adhesion of the cured sealant on test joint before applying to the entire project.
SUGGESTED USES
FOR BEST RESULTS
APPLICATION