TDS

ManualsBrandsDAP ManualsCaulk & SealantsAMP Advanced Modified Polymer 9 oz. Crystal Clear All Weather Window, Door and Siding Sealant

02/21/2021

DAP

AMP

™

Advanced Modified Polymer All

Weather Window, Door, Siding & Trim

Sealant

DAP’s

AMP

™

Advanced Modified Polymer All Weather Window, Door and Siding Sealant provides

a 100% weatherproof and waterproof seal with the ability to be applied on wet and damp surfaces. It has

a fast 30 minute paint and rain ready time and meets ASTM C920, Class 25. Exterior/Interior use.

This premium hybrid technology offers maximum flexibility and superior adhesion for a durable seal that

won’t crack or shrink and can withstand the expansion and contraction caused by temperature and

weather fluctuations. It can be applied in extreme temperatures – from 0°F to 140°F and is mold and

mildew resistant once cured.

DAP AMP All Weather Window, Door, Siding and Trim sealant is easy to use, low in odor, VOC

compliant and formulated for superior UV resistance

. Backed by a lifetime guarantee.

*Superior color and clarity over traditional clears but may discolor under certain conditions.

• 100% weatherproof & watertight seal

• Proven wet & damp surface application

• Extreme temperature use: 0°F to 140°F

• 30 minute water & paint ready

• Meets ASTM C920, Class 25

• Shrink & crack proof

• Strong, multi-surface adhesion, especially to non-porous substrates

• Easy gunning, smooth tooling

• Low odor & VOC compliant

• Exterior/Interior use

PACKAGING

COLOR

UPC

9.0 fl oz (266 mL)

Crystal Clear* 07079800763

PRODUCT DESCRIPTION

KEY FEATURES & BENEFITS

Summary of content (4 pages)

PAGE 1
DAP® AMP™ Advanced Modified Polymer All Weather Window, Door, Siding & Trim Sealant PRODUCT DESCRIPTION DAP’s® AMP™ Advanced Modified Polymer All Weather Window, Door and Siding Sealant provides a 100% weatherproof and waterproof seal with the ability to be applied on wet and damp surfaces. It has a fast 30 minute paint and rain ready time and meets ASTM C920, Class 25. Exterior/Interior use.
PAGE 2
• Lifetime Guarantee SUGGESTED USES USE FOR CAULKING AND SEALING: • Windows • Doors • Siding • Exterior Trim • Baseboards • Molding • Gutters ADHERES TO: • Wood – painted & unpainted • Vinyl • Most plastics • Aluminum • Most metals • Fiber cement • Concrete • Natural Stone • Brick • • • • • • • Flashing Pipes Vents Ducts Butt joints Corner joints Above ground foundations • • • • • • • Glass Ceramic Fiberglass Drywall Plaster Stucco Most common building materials FOR BEST RESULTS • • • • • Applicatio
PAGE 3
Product Application 1. Cut nozzle at a 45° angle to desired bead size. 2. Puncture inner foil seal. 3. Load cartridge into caulk gun. 4. Fill gap with sealant. Using steady pressure, apply consistent 3/16" bead size for optimal joint protection. 5. If necessary, tool or smooth the bead of sealant with a finishing tool before the sealant skins over. 6. Allow sealant to cure for at least 30 minutes before exposing to water or paint. Sealant surface may still be tacky. Sealant reaches full cure in 24 hours. 7.
PAGE 4
Typical Cured Performance Properties Service Temperature Range -65ºF to 190°F for continuous use, 250º with excursions Water Ready Time 30 minutes Paint Ready Time 30 minutes Mildew Resistance Cured sealant is mold & mildew resistant Dynamic Joint Movement (ASTM C920) +/-25% CLEAN UP & STORAGE Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away. Do not use mineral spirits or any other solvent to clean hands or skin.