User`s manual

DAP Technologies 4-3

Managing Power

Via Charger (Optional)

1. From the top side of the battery pack, align and place the battery into the

battery charger.

2. Press down on the battery pack.

3. Repeat the above steps to install the second battery pack if necessary.

4. Plug the DC cord of the AC adapter into the power connector of the battery

charger.

5. Plug the female end of the AC power cord into the AC adapter.

6. Then plug the male end of the AC power cord into an electrical outlet.

7. Wait until the LED indicator on the battery charger lights from “red” to

“green”, indicating charging is nished.

NOTE:

• The additional battery pack is optional.

• The battery pack(s) are hot-swappable.