User`s manual

DAP Technologies 3-3
Connecting Your M9020
Connecting VGA Devices
Your M9020 has one VGA port for connecting VGA devices, such as an external
monitor.
Perform the following, to connect a VGA device:
1. Release the compartment cover. See “Releasing the Compartment Cover”
on page 1-12.
2. Gently disconnect the RS-232 and USB cables from the connectors on
motherboard.
3. Remove the compartment cover.
4. Connect the VGA cable to the VGA connector of the M9020.
5. Connect the VGA cable to the VGA device.
Full COM
Full COM
PWR
VGA USB
TxRx TxRx
USB
USBUSB
WARNING: Prior to using the
connection points, contact
DAP Technologies at: +1
(855) DAP-TECH. Failure to
follow this instruction could
void product warranty.