User Manual

32
_MAN40-A (CMU040-A3)
Power Gauge
Calibration
with
BatMngr.exe
The CE8000 Series unit includes a Power Gauge to monitor the power
remaining in the main battery at any time (Good, Low, Very Low). This
gauge indicates the estimated remaining time and percentage.
The Battery Status indicator will flash when the battery reaches the Battery
Warning Level.
To get a better precision with the warning level messages, it is recommended
to recalibrate the battery on a regular basic. This process can take up to 16
hours.
NOTE: A non-calibrated power gauge DOES NOT affects neither
the battery life nor the charging duration. The calibration
only allows the CE8000 Series unit to accurately report the
remaining capacity of the main battery and to enable the
Battery Status indicator to blink when the battery reaches
the Warning Level. A CE8000 Series unit can be used with
a non-calibrated power gauge.
You can start the application by pressing CTRL and F2
Note: Shortcut Key could have been deactivated
FIGURE 14
STARTING POWER GAUGE CALIBRATION
Result of the calibration will be given at the end of the cycle.
Tap on the File menu an
d
select Start
Calibration
Note
Calibration is maintained into the battery pack. This means
that you can calibrate a battery on one unit and use it on any
other CE8640 Series unit with preserved calibration.