User Manual

31
_MAN40-A (CMU040-A3)
To remove the battery:
Turn-off the unit. On the back of the CE8000 at the bottom right corner, turn
the wheel in the direction of the open lock to release the battery (see
pictogram near the wheel).
To install the battery:
Place the battery in the compartment then press and old down the battery
while turning the wheel to the direction of the closed lock (see pictogram near
the wheel). The wheel must be tightened completely to allow the unit to start.
If the wheel is not completely closed, the unit will not start even if a
charger is present. A warning message will be display on the CE8000
unit to ask the user to correctly close the wheel.
Recycling the
battery
The type of main battery used in all CE8000 Series units is not considered as
a hazardous waste. Refer to your local regulation for the proper methods of
disposal.
BATTERY PRECAUTION
S
WARNING: Personal injuries may result if batteries are not
handheld with care
• If the battery becomes unusable, dispose of it immediately.
• Keep the batteries away from heat sources, including open fires
and direct sunlight.
• Never disassemble a battery.
• Do not place batteries through metal pieces that can short-circuit
the power contact pin.