User Manual

_MAN40-A (CMU040-A3)

When the Backup Battery Very

Low message appears the backup

battery is so low that data and

programs could have been corrupted.

Replacing the

main battery

It is preferable to replace the main battery in a clean and dry area. Make sure

that neither water nor dust can enter the CE8000 Series unit.

NOTE: The CE8000 Series unit as an integrated hardware/software

system that allows user to remove the battery without

having to turn off the unit.

Even if the system is safe enough in most applications, we

highly recommend to turn-off the unit before removing the

battery

The CE8000 Series unit uses a specifically designed and tested main battery

to insure quick charging time, long-battery life and to withstand shocks and

vibrations. To be sure that the battery is conform for usage on a DAP

equipment, buy them directly from DAP TECHNOLOGIES or one of its

distributors (Part number DCCE800-Y or DCCE800-G) and check for the

DAP label on it.

Replacement of the main battery is an easy task. Follow the steps outlined

below.

FIGURE 13

BATTERY COMPARTMENT

FIGURE 1 2

BACKUP BATTERY VERY LOW