User Manual

_MAN40-A (CMU040-A3)

Figure A Figure B

ADVANCED BATTERY OPTIONS

Battery Power

Management

All CE8000 Series unit are delivered with a main battery already calibrated

but you might need to make a new calibration to get better precision. Using

the BatMngr applet you will be able to manage all power properties like the

warning level and power off options.

Double tap on

and then select the tab name Warning

Figure A and B shows that the default power properties are set to:

Low level = 16%

Very Low level = 5%

This setting means that the CE8000 Series unit battery status monitor will

start flashing red when it remains 16% of the complete charge on the main

battery

You will see the Main Battery field becoming highlighted Low under the

Status tab (Figure A). It will stay highlighted as long as the battery level is

between 6 and 16.

At 5%, the battery status monitor will still continue to flash and a pop-up

window will be displayed telling you that your main battery is very low on

power. Messages will be displayed every four (4) minutes approximately. The

Main battery field is highlighting Very Low (Figure A). It will stay

highlighted as long as the battery level is lower or equal to 5.

See section

(Low Battery Message) for description of the different messages

appearing when going out of battery power.