MANUAL ENGLISH IMIX 7.3 Ordercode: D2351 Highlite International B.V.
IMIX 7.3 Table of contents Warning ...............................................................................................................................................................................2 Unpacking Instructions .................................................................................................................................................2 Safety Instructions .............................................................................................................
IMIX 7.3 Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
IMIX 7.3 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never remove warning or informative labels from the unit. Never use anything to cover the ground contact.
IMIX 7.3 Operating Determinations This system is not designed for permanent operation. Consistent operation breaks will ensure that the system will serve you for a long time without defects. If this system is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void. Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
IMIX 7.3 Description of the device Features The IMIX-7.3 is a compact installation mixer with zone control. It has exact the same functionality as the IMIX-7.3 but each input on the IMIX-7.3 can be routed to the desired output. This function makes it possible to control 3 areas with different music, sound level and EQ settings. Gain settings at backside Special front input for phone/mp3 devices Zone control for 3 balanced outputs 2 Mic, 11 Line inputs.
IMIX 7.
IMIX 7.3 Functions 1. Mic input connector Electronically balanced combo-type input for connecting low impedance microphones. The input has extremely low noise and low hum. When connecting a microphone make sure that the pin assignment is correct. Always make sure to read the manual of the microphone you want to connect. The XLR- input is not suitable for connecting an additional mixing console, FX- unit, etc. You have to use the line (54-58) inputs, when connecting this kind of equipment.
IMIX 7.3 13. Phono-line 1 LED Indicates that the phono-line 1 input is selected. 14. Line 2 LED Indicates that the line 2 input is selected. 15. Selection button (phono-line 1/line 2) With this switch you can choose between two sets of inputs per channel. 16. Peak LED The peak LED shows signal peaks in a channel’s incoming signal.
IMIX 7.3 24. Phone/line button Use this button to configure both aux (22,23) inputs for either line level or phone level. When the input level is too low, press the line/phone level switch. When the light is on, the level of the input signal will be boosted. The phone level adjusts the input sensitivity into the correct level for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. 25/26/27.
IMIX 7.3 32. Power adapter connector This is the remote AC power supply input socket for the IMIX-7.3. It is a special three core socket. Please use the supplied DAP audio adapter only. 33. Power on/off switch Do not supply power before the whole system is set up and connected properly. 34. With/without mic switch Use this switch if you don’t want your microphone signal at the record (47) outputs. 35.
IMIX 7.3 43. Mic 2 combo input connector Depending on what’s most suitable in a given situation, you can use the Combo input at the front or the rear. Both inputs are wired in parallel so you can even use them to link through. 44. Mic 1 combo input connector Depending on what’s most suitable in a given situation, you can use the Combo input at the front or the rear. Both inputs are wired in parallel so you can even use them to link through. 45.
IMIX 7.3 Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa. Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables.
IMIX 7.3 Troubleshooting DAP Audio IMIX-7.3 This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. 1. 2. 3. 4. 5. If the device does not operate properly, unplug the device. Check power from the wall, all cables, connections, etc. If all of the above appears to be O.K., plug the unit in again.
IMIX 7.
©2013 DAP Audio
