Owner's manual

CDR-110MKIV

Ordercode: D1259

9. Pausing

01) Press the Play/Pause (9, 34) button to switch between play and pause.

02) Playback resumes when the Play/Pause (9, 34) button is pressed again.

10. Recording:

01) Press the Func (20, 41) button to select a source. You can select:

 CD: for recording from a CD directly to either SD/MMC card or USB stick (in MP3 format).

 AUX: for recording from a source connected to the Aux In (23) input directly to either SD/MMC

card or USB stick (in MP3 format).

 CARD: for copying a SD/MMC card to a USB stick.

 USB: for copying a USB stick to a SD/MMC card.

02) Pressing the Rec (44) button shortly will start the actual recording. The display will flash and look as

shown in fig. 08.

Fig. 08

03) After 3 seconds the unit will automatically start recording. While recording, the display looks as shown

in fig. 09.

Fig. 09

04) Press the Rec (44) buttons when you’re finished recording. The display will show REC OK as shown in

fig. 10.

Fig. 10

05) Now your recording is finished. The first time you’re recording from the Aux In (23) input, the CDR-110

will automatically generate a folder on the medium you’re recording on named TMAUX. In future the

CDR-110 will store all files recorded from the Aux In (23) input in this folder. The files will be named

TMAUX001, TMAUX002 etc. as they are recorded.

06) If you’re recording from SD/MMC card to USB stick, or from USB to SD/MMC card, the procedure is

the same. The only difference is that you can copy separate folders from one medium to another.

The display will show copy and the folder generated by the CDR-110 on your medium is called

COPY. The copied files keep their original names.