Owner's manual

CDR-110MKIV

Ordercode: D1259

6. Using the Find function:

01) Press the Find (15, 35) button once to start track search. See fig. 05.

Fig. 05

02) You can change the Search character by using the Rev (6, 40) and Cue (7, 39) buttons.

03) If you find more than one track starting with the same search character then press and hold either

Rev (6, 40) or Cue (7, 39) button for three seconds. The search character starts blinking. Now

you can scroll through all tracks starting with the same search character by using the Rev (6, 40)

and Cue (7, 39) buttons. Exit the scroll mode by pressing and holding the Rev (6, 40) or the

Cue (7, 39) button for three seconds again.

04) Press the Find (15, 29) button again to browse through your folders. The display will look as shown in

fig. 06.

Fig. 06

05) You can browse through your folders by using the Rev (6, 40) and Cue (7, 39) buttons.

06) Exit the find mode by pressing the Find (15, 29) button again.

7. Starting Playback

01) Press the Play/Pause (9, 34) button during Stop mode or Pause mode to start playback. While running

a track, the display will look as shown in fig. 07.

Fig. 07

8. Stop Playback

There are two ways to stop playback:

01) Press the Play/Pause (9, 34) button during playback to pause at that point.

02) Press the Stop (8, 35) button during playback to return to Stop mode.