User manual

IR-100
Ordercode: D1249
4. FM
With this menu it is possible to search for and store local radio stations.
01) Press the buttons (15/17/30/33) to start auto search. The search will stop as soon as the
device has found a radio signal which is strong enough. Press the buttons again, to manually stop
the search.
02) Press the buttons (16/18/29/32) to fine-tune the newly found radio station.
03) Press and hold down the FAV button (14/40) for 3 seconds or press the MEMORY button (39) to
proceed to saving.
04) Press the buttons (16/18/29/32) to choose the preset which you want to save your radio station
in.
05) Press the ENTER button (20/31) to save the radio station.
06) Press the FAV button (14/40) to enter the list of presets.
07) Press the buttons (16/18/29/32) to choose the desired preset.
08) Press the ENTER button (20/31) to activate the preset.
5. Information Center
With this menu it is possible to view weather, financial and system information.
01) Press the buttons (16/18/29/32) to choose one of the 3 menus:
• Weather Information
• Financial Information
• System Information
02) Press the ENTER button (20/31) to enter the desired menu.
5.1. Weather Information
With this menu it is possible to view the weather information from all over the world.
01) Press the buttons (16/18/29/32) to choose the continent, the weather of which you would like to
check.
02) Press the ENTER button (20/31) to confirm.
03) Repeat steps 1-2, to choose the desired countries and cities, in order to check the current weather
information.
5.2. Financial Information
With this menu it is possible to view the current situation on the stock exchange markets from all over the
world.
01) Press the buttons (16/18/29/32) to browse through the most important stock echange markets.
5.3. System Information
With this menu it is possible to view information concerning the software version and the wireless/wired
network parameters.
01) Press the buttons (16/18/29/32) to browse through the following 3 menus:
• Version
• Wireless Info
• Wired Info
Version
Here, you can view the current software version.
Wired/Wireless Info
01) Press the buttons (16/18/29/32) to choose either Wireless Info or Wired Info and press the ENTER
button (20/31) to open the menu.
02) Now, you can view such pieces of information as your network status, MAC address, SSID, IP address,
subnet, gateway, DNS1 and DNS2.
16