Operation Manual

14
Rear
Fig. 13
45. Power switch
Do not supply power before the whole system is set up and connected properly.
46. Stereo/mono Switch
When set to mono, the master output becomes a monaural combination of L+R.
47. Master RCA unbalanced output
Use these outputs to connect an amplifier with unbalanced inputs.
48. Booth RCA unbalanced output
Use these outputs to connect an amplifier with unbalanced inputs.
49. Record RCA unbalanced output
Use these to connect a recording device.
50. Channel 4 line RCA input
Use to connect a line level device.
51. Channel 4 phono RCA input
Use to connect a turntable.
52. Channel 4 CD RCA input
Use to connect a CD player.
53. Channel 3 line RCA input
Use to connect a line level device.
54. Channel 3 CD RCA input
Use to connect a CD player.
55. Channel 2 line RCA input
Use to connect a line level device.
56. Channel 2 CD RCA input
Use to connect a CD player.
57. Channel 1 line RCA input
Use to connect a line level device.
58. Channel 1 phono RCA input
Use to connect a turntable.