Operation Manual

13
Caution: Depending on the type of headphones connected to the Headphones jack, the Core mix 4 USB
is capable of producing high output levels via the phones output. Therefore, make sure to turn the
control all the way to the left (minimum setting) before connecting the headphones. Be aware of the
fact that listening to loud sound pressure levels over a longer period of time leads to hearing-damage!
Record Module
34. EQ button
Pushing the EQ button allows you to select a preset EQ curve. You can choose
between: None - Pop – Rock – Bass – Jazz – Classic.
35. USB slot
Slot for inserting an USB stick.
36. SD card slot
Slot for inserting a SD/MMC card. The contacts of the card must point
downwards.
37. Display
Fig. 12
38. Repeat button
Tap the repeat button to select between: Repeat single track, Repeat USB- stick/SD- card or repeat off.
39. Stop button
Push the stop button to stop playback/recording.
40. Play/pause button
Use this button to start playback. Press once to start playback, twice to set the pause mode, and again
to resume playback.
41. / button
Tapping this button allows you to skip to the next track.
Pushing and holding this button allows you to play a track fast forward.
42. / button
Tap this button to go back to the beginning of the current track or select a previous track for playing.
Pushing and holding this button allows you to play a track fast backwards.
43. Delete button
Push the delete button during playback. In the display appears: “Del One?”. Pushing the delete button
again will delete the current track. “Success” will appear in the display.
44. Record button
Pushing this button will start recording the master mix independent of the Master (25) control.
Note: depending on the USB stick/ SD card you use, it can take a couple of seconds before the actual
recording will start.