User manual
12
COM-ART
Ordercode: D1414
Maintenance
The COM-ART requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply and wipe with a damp cloth. Do not immerse in liquid. Wipe clean
with a soft cloth. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications
COM-AT (Transmitter)
Channel:
Multi-channel, up to 16 frequency presets per each frequency band
Frequency band:
UHF 606-630 MHz, dependent on applicable country regulations
Frequency response:
30 Hz - 17 kHz (±3dB)
Oscillation mode:
PLL UHF SYNTHESIZED
Range:
<50 m
Frequency stability:
±0.005% (-10 ~ 50°C)
T.H.D.:
1 kHz <0.3%
Modulation mode:
FM (F3E)
Signal to noise:
>98 dB
Dynamic range:
>100 dB
RF output power:
10 mW
Max. balance input/deviation:
Max. 8 dBu/±50 kHz
Power requirements:
AA (LR6) 1,5V
Power supply:
5V DC (500 mA)
Dimensions:
114 x 22 x 23 mm (LxWxH)
Weight:
0,02 kg
COM-AR (Receiver)
Channel:
Multi-channel, up to 16 frequency presets per each frequency band
Frequency band:
UHF 606-630 MHz, dependent on applicable country regulations
Receiver type:
PLL UHF SYNTHESIZED
Range:
<50 m
Frequency response:
30 Hz - 17 kHz (±3dB)
Frequency stability:
±0.005% (-10 ~ 50°C)
T.H.D.:
1 kHz <0.3%
Modulation mode:
FM (F3E)
Signal to noise:
>98 dB
Dynamic range:
>100 dB
RF sensitivity:
-100 dBm/12 dB SINAD
Max. balance output/deviation:
Max. 8 dBu/±50 kHz
Power requirements:
AA (LR6) 1,5V
Power supply:
5V DC (500 mA)
Dimensions:
101 x 22 x 23 mm (LxWxH)
Weight:
0,02 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl