User manual

COM-ART

Ordercode: D1414

Set Up and Operation

Location

For best operation, the COM-AT (transmitter) and the COM-AR (receiver) should be:

 Located above the ground, as high as possible,

 Positioned away from walls or metal surfaces, to minimize reflections,

 The receiver antenna should be kept away from noise sources such as other digital equipment,

microwave ovens or other large metal objects. The device works best when the receivers are

located within the line of sight of the transmitter.

Connection

01) Connect the COM-AT (transmitter) to your mixer’s main XLR output.

02) Connect the COM-AR (receiver) to an amplifier/active speaker.

Fig. 04

Note: In order to produce stereo sound, it is necessary to purchase 2 sets of D1414 (see fig. 04).