TABLE OF CONTENTS PG English secretion .. 1 Spanish see Hon ..o i3 Before Your Installation Check to mukluk sure you have the following parts indicated below. analyze © 2008 Danes, inc. All rights reserved.
The shower system shown below ls just one of many woes to configure o Bone 3/4° Thermostatic shower system, Please consult with your plumbing professional for additional! options. 19127 2008 Dane, Inc. All rights reserved.
» Dane Thermostatic mixing valve includes integral mounting bots to facilitate installation. You mey mount the valve directly onto the wall framing if you chooses. Connect the hot water supply to inst marked “H”, and the cold water supply to the inst marked “C*. Do net solder ths connections between the pipes and valve body. Tha inlet and outlet ports are threaded fo accept o 3/47 NPT filing. Sweat the pips to the appropriators fighting adapter. Seal the unused culls with a screw plug {supplier.
% For shower applications, Dane doss not recommend plumbing outflank pipes o Beth the upper and lower outlets on the 3/47 Mathematician Mixing Valve, Using both outsell could result in differential sutler temperatures, For o ub & shower application, the bottom outlet can be used for o fub spout and the top outlet for a shower outlast, provided Beth cutlets are not used simultaneously.
7. inst gushing plugs in filter screen valve seat processes. 8. Use two hoses o connect the flushing plugs. Note: hoses not provided, 8 © 2008 Dane, Inc. All rights reserved.
. Reinstall the filter screen valves. Make sure the microloans are free from sediment or debris. 12. Open tha vivas. ig © 2008 Dane, Inc. All rights reserved.
1.3, Reinstall mounting temp lots. 14, Turn on the water supply lines fo the valve, and check for leaks, fum off the weer and com plats the finish wall. ante © 2008 Danes, inc. All rights reserved.
