Full Product Manual

Fig. 3.1

STEP 3

(Adjusting Lift / Jack Orientation)

1. Following the manufacturer’s instructions in the lift

manual, lower the lift to the ground. (If using a shop crane,

you may need to lock the lift on the rst Safety Lock to

make room for the legs of the Shop Crane.)

2. If adjustable, adjust the Runway of the lift to the desired

width. Be sure to check the specications of the lift and the

Rolling Bridge Jacks to be sure that the Rolling Bridge Jack

can be adjusted to the desired Runway width.

(See Fig. 3.1 & 3.2)