Installation Guide
Table Of Contents
- D4-9 Manual
- Table of Contents
- Introduction
- Shipping Information
- Safety
- Additional Product
- Components
- Specifications
- Installation Checklist
- Installation
- Safety Rules
- Using Tools
- Clearances
- Usable Area
- Selecting a Location
- Planning for Electrical Work
- Unloading and Unpacking
- Selecting your Power Post Location
- Creating Chalk Line Guides
- Moving the Posts into Position
- Installing the Crosstubes
- Raising the Crosstubes
- Installing the Runways
- About Safety Locks
- Installing the Safety Lock Release Mechanism
- About the Pivot Pieces
- Installing the Top Caps
- Routing the Lifting Cables
- Installing the Safety Covers
- Installing the Power Unit
- Installing the Flex Tube
- Hydraulic Fluid Contamination
- Installing the Hydraulic Hose
- Working with Compression Fittings and Tubing
- Installing the Return Line
- Contacting the Electrician
- Connecting to a Power Source
- Adding Hydraulic Fluid
- Installing a Power Disconnect Switch
- Installing a Thermal Disconnect Switch
- About Embedment
- Anchoring the Posts
- Final Leveling
- Installing Accessories
- Lubricating the Lift
- Performing an Operational Test
- Final Checklist Before Operation
- Operation
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Labels
- Parts Drawings
- Automotive Lift Institute (ALI) Store
D4-9 / D4-9X Four-Post Lifts 3 P/N 5900251 — Rev. A— October 2020
Table of Contents
Introduction 3 Operation 55
Shipping Information 4 Maintenance 58
Safety 4 Troubleshooting 60
Additional Product 6 Wiring Diagrams 62
Components 7 Labels 63
Specifications 9 Parts Drawings 67
Installation Checklist 11
ALI Store 71
Installation 12
Introduction
This manual describes the following Dannmar Lifts:
• D4-9: Four-post Lift that can raise Vehicles up to 9,000 pounds (4,082 kg). ALI Certified.
• D4-9X: Four-post Lift with
extended length and height
that can raise Vehicles up to 9,000
pounds (4,082 kg). ALI Certified.
This manual is mandatory reading for all users of these Lifts, including anyone who installs, uses,
maintains, or repairs them.
⚠ DANGER Be
very
careful when installing, operating, maintaining, or repairing the unit; failure
to do so could result in property damage, product damage, injury, or (in rare cases)
death. Make sure only authorized personnel operate the unit. All repairs must be
performed by an authorized technician. Do not make modifications to the unit; this
voids the warranty and increases the chances of injury or property damage. Read
and follow the instructions in this manual and on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
If you are having issues, refer to the Troubleshooting section of this manual for assistance.