Installation Guide
Table Of Contents
- D4-9 Manual
- Table of Contents
- Introduction
- Shipping Information
- Safety
- Additional Product
- Components
- Specifications
- Installation Checklist
- Installation
- Safety Rules
- Using Tools
- Clearances
- Usable Area
- Selecting a Location
- Planning for Electrical Work
- Unloading and Unpacking
- Selecting your Power Post Location
- Creating Chalk Line Guides
- Moving the Posts into Position
- Installing the Crosstubes
- Raising the Crosstubes
- Installing the Runways
- About Safety Locks
- Installing the Safety Lock Release Mechanism
- About the Pivot Pieces
- Installing the Top Caps
- Routing the Lifting Cables
- Installing the Safety Covers
- Installing the Power Unit
- Installing the Flex Tube
- Hydraulic Fluid Contamination
- Installing the Hydraulic Hose
- Working with Compression Fittings and Tubing
- Installing the Return Line
- Contacting the Electrician
- Connecting to a Power Source
- Adding Hydraulic Fluid
- Installing a Power Disconnect Switch
- Installing a Thermal Disconnect Switch
- About Embedment
- Anchoring the Posts
- Final Leveling
- Installing Accessories
- Lubricating the Lift
- Performing an Operational Test
- Final Checklist Before Operation
- Operation
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Labels
- Parts Drawings
- Automotive Lift Institute (ALI) Store
D4-9 / D4-9X Four-Post Lifts 10 P/N 5900251 — Rev. A— October 2020
Model
D4-9 D4-9X
Lifting capacity
9,000 lbs / 4,082 kg
Maximum capacity front axle
4,500 lbs / 2,041 kg
Maximum capacity rear axle
4,500 lbs / 2,041 kg
a Total width
114.5 in / 2,907 mm
b Outside Posts length
176.5 in / 4,482 mm 200.5 in / 5,092 mm
c Total length (includes Ramps)
203 in / 5,153 mm 227 in / 5,763 mm
d Post height
89 in / 2,262 mm 99 in / 2,516 mm
e Runway thickness
5 in / 118 mm
f Maximum rise
70 in / 1,724 mm 82 in / 2,012 mm
g Maximum lifting height
75 in / 1,908 mm 87 in / 2,215 mm
h Distance between Posts
98 in / 2,490 mm
i Runway width
18.75 in / 476 mm
j Width between Runways
37.5 in / 953 mm
k Runway centerline
53.75 in / 1,365 mm
l Outside edge of Runways
72.5 in / 1,842 mm
m Drive-through clearance
86 in / 2,184 mm
n Length of Runways
165.5 in / 4,208 mm 189.75 in / 4,818 mm
Min. wheelbase @ rated capacity
1
115 in / 2,921 mm 135 in / 3,429 mm
Min. wheelbase @ 75% capacity
1
100 in / 2,540 mm 115 in / 2,921 mm
Min. wheelbase @ 50% capacity
1
85 in / 2,159 mm 95 in / 2,413 mm
Min. wheelbase @ 25% capacity
1
70 in / 1,778 mm 80 in / 2,032 mm
Locking positions
13; every 4 in / 102 mm 16; every 4 in / 102 mm
Lifting time to maximum rise
45 seconds 55 seconds
Motor
110 VAC, 60 Hz, 1 Ph standard; 208-240 VAC available
Sound (when raising/lowering) <70 dBA
1
The Lift supports less weight than its full rated capacity if a Vehicle’s wheelbase is shorter because
the Wheels of the Vehicle are closer to the middle of the Runways, where there is less strength. For
example, if you put a Vehicle with a wheelbase of only 84.5 inches on a D4-9, the shorter
wheelbase puts more weight in the middle of the Runways, reducing the Lift’s capacity to
4,500 lbs (50% of its full rated capacity of 9,000 lbs).
Specifications subject to change without notice.