Full Product Manual

D-7/X PARTS LIST
ITEM # PART # QTY.
1 17051007 1
2 17051008 1
3 17051009 2
4 17052009 1
5 17052010 1
6 17057014 4
7 17057015 2
8 17058066 2
9 17058067 2
10 17204012 4
11 17202021 12
12 17057016 6
13 17058068 2
14 17058069 2
15 17058070 2
16 17200018 4
17 17300004 1
18 17207015 1
19 17206013 1
20 17206008 1
21 17206022 1
22 17201018 1
23 17056005 1
24 17057017 1
25 17057019 1
26 17207041 1
27 17201019 1
28 17058071 4
29 17058121 2
30 17058122 2
31 17207020 8
32 17250004 1
33 17058074
DESCRIPTION
D-7/X POWERSIDE POST ASSEMBLY
D-7/X LEFT POST ASSEMBLY
D-7/X RIGHT POST ASSEMBLY
D-7/X POWER SIDE RAMP ASSEMBLY
OFFSIDE RAMP ASSEMBLY
POST TOP PLATE ASSEMBLY
DRIVE TIE PLATE ASSEMBLY
DRIVE-UP RAMP
REAR STOP PLATE (PARTS BOX)
25 x 90mm CLEVIS PIN (PRE-ASSEMBLED)
M20 FLAT WASHER (PARTS BOX)
D-7/X CABLE PULLY (PRE-ASSEMBLED)
LARGE PULLEY SPACER (PRE-ASSEMBLED)
MEDIUM PULLEY SPACER (PRE-ASSEMBLED)
SMALL PULLEY SPACER (PRE-ASSEMBLED)
M8 x 20 SOCKET HEAD CAP SCREW (PRE-ASSEMBLED)
POWER UNIT ASSEMBLY
POWER UNIT VIBRATION DAMPENER (PARTS BOX)
STRAIGHT THREAD 90 ELBOW W/ O-RING SEAL 6801-04-06-NWO
MALE 90 ELBOW 2501-04-06 (PARTS BAG)
STRAIGHT BULKHEAD 2700-04-04 (PARTS BAG)
7/16-20 JAM NUT (PARTS BAG)
HYDRAULIC HOSE ASSEMBLY 1920MM (PARTS BOX)
D-7/X SAFETY HANDLE ASSEMBLY
D-7X LONG SAFETY BAR ASSEMBLY
ROUND KNOB
M16 COUPLING NUT (PARTS BAG)
SAFETY SPACER (PARTS BAG)
M6x2140 DOUBLE END THREADED STUD
M6x280 DOUBLE END THREADED STUD
M6 FEMALE ROD END (PARTS BAG)
CYLINDER Ø3.0 x 82 (PRE-ASSEMBLED)
25x89mm CYLINDER PIN (PRE-ASSEMBLED)
1
Page 24
For technical questions, please call 877.432.6627