Full Product Manual

22.
ALWAYS ENSURE that the safety locks are engaged before any attempt is made to work on or
near vehicle.
23.
DRESS PROPERLY. Non-skid steel-toe footwear is recommended when operating lift.
24. GUARD AGAINST ELECTRIC SHOCK. This lift must be grounded while in use to protect the
operator from electric shock. Never connect the green power cord wire to a live terminal. This is
for ground only.
25.
DANGER! The power unit used on this lift contains high voltage. Disconnect power at the
receptacle before performing any electrical repairs. Secure plug so that it cannot be accidentally
plugged in during service.
26. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses.
They are not safey glasses.
27. MAINTAIN WITH CARE. Keep lift clean for better and safe performance. Follow manual for proper
lubrication and maintenance instructions. Keep control handles and / or buttons dry, clean and
free from grease and oil.
28.
STAY ALERT. Watch for dangers while working on or around lift.
29. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, breakage of parts or any
condition that may affect its operation. Do not use lift if any component is broken or damaged.
30. NEVER remove safety related components from the lift. Do not use lift if safety related
components are damaged or missing.
31. NOTE: If attachments, accessories, or configuration modifying components that a e located in
the load path, affect operation of the lift, affect the lift electrical listing or affect intended vehicle
accommodation are used on this lift and, if they are not certified for use on this lift, then the
certification of this lift shall become null and void. Contact Dannmar Equipment for information
pertaining to certified attachments, accessories, or configuration modifying component
Page 5
For technical questions, please call 877.432.6627