Full Product Manual

Page 20
For technical questions, please call 877.432.6627
TO LOWER THE LIFT:
1. First, raise the lift to clear the safety locks.
2. Depress air safety release button and hold. (If not so equipped, release safety locks manually.)
3. Push the lowering handle and hold until the lift has descended completely.
4. If the lift is shaking, vibrating, or swaying, reduce the descending speed.
WEEKLY MAINTENANCE:
1. Lubricate all rollers with general purpose lubricating oil.
2. Check all connections, bolts, and pins to ensure proper mounting.
3.
Lubricate primary safety pivot pin with white lithium grease.
MONTHLY MAINTENANCE:
1. Check all safety devices to make sure they are in good operating condition.
2. Inspect all anchor bolts and retighten if necessary.
3. Make a visual inspection of all moving parts for wear. If worn parts are evident, DO NOT USE
LIFT. Replace all worn parts before lift is put back into operation.
1. If any component of the lift is found to be defective, DO NOT USE LIFT!
2. Never operate the lift with any person or equipment below.
3. Always stand clear of lift when lowering or raising.
4. Never exceed the rated capacity.
5. Always ensure the safety devices are engaged before any attempt is made to work on or near the
vehicle. Never leave lift in an elevated position unless the safety devices are engaged.
WARNING