Full Product Manual

FOR TECHNICAL QUESTIONS, CALL [phone]
23
When the cable adjusting nuts bottom out on the threaded end of the cable connector and there is still
slack in the cables, the cables have stretched beyond the safe useful length and need to be replaced
with factory approved cable assemblies. Do not place washers, spacers or other devices to shorten
the effective cable length as damage to the lift or injury to persons may occur.
EQUALIZER CABLE ROUTING
NOTE: On the “CX” model both equalizer cables are the same
length. The top trough pulleys ARE NOT staggered. On “AC” and
“ACX” models there is one short and one long equalizer cable.
The top trough pulleys ARE staggered. Shorter cable goes on
pulleys that are staggered closer together.
WARNING