Full Product Manual

VISIT US ON THE WEB AT WWW.DANNMAR.COM6

SAVE THESE INSTRUCTIONS

OWNER / EMPLOYER RESPONSIBILITIES

• Shall ensure that lift operators are qualiﬁed and that they are trained in the safe use and operation of

the lift using the manufacturer’s operating instructions; ALI/SM01-1, ALI Lifting it Right safety manual;

ALI/ST-10 ALI Safety Tips card; ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts

Safety Requirements for Operation, Inspection and Maintenance; ALI/WL Series, ALI Uniform Warning

Label Decals/Placards; and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/

Quick Reference Guide for Frame Engaging Lifts.

• Shall establish procedures to periodically inspect the lift in accordance with the lift manufacturer’s

instructions or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts Safety

Requirements for Operation, Inspection and Maintenance; and The Employer Shall ensure that lift

inspectors are qualiﬁed and that they are adequately trained in the inspection of the lift.

• Shall establish procedures to periodically maintain the lift in accordance with the lift manufacturer’s

instructions or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts Safety

Requirements for Operation, Inspection and Maintenance; and The Employer Shall ensure that lift

maintenance personnel are qualiﬁed and that they are adequately trained in the maintenance of the lift.

• Shall maintain the periodic inspection and maintenance records recommended by the manufacturer

or ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts Safety Requirements for

Operation, Inspection and Maintenance.

• Shall display the lift manufacturer’s operating instructions; ALI/SM 93-1, ALI Lifting it Right safety

manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI ALOIM-2008, American National Standard for

Automotive Lifts Safety Requirements for Operation, Inspection and Maintenance; and in the case of

frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging

Lifts; in a conspicuous location in the lift area convenient to the operator.

• Shall not modify the lift in any manner without the prior written consent of the manufacturer.

• Shall provide necessary lockout/tagout means for energy sources per ANSI Z244.1-1982 (R1993),

safety requirements for the lockout/tagout of energy sources, before beginning any lift repairs.

INSTALLER / OPERATOR PLEASE READ AND FULLY UNDERSTAND.

BY PROCEEDING YOU AGREE TO THE FOLLOWING.

• I have visually inspected the site where the lift is to be installed and veriﬁed the concrete to be in

good condition and free of cracks or other defects. I understand that installing a lift on cracked or

defective concrete could cause lift failure resulting in personal injury or death.

• I understand that a level ﬂoor is required for proper installation and level lifting.

• I understand that I am responsible if my ﬂoor is of questionable slope and that I will be responsible for

all charges related to pouring a new level concrete slab if required and any charges.

• I understand that Dannmar lifts are supplied with concrete fasteners meeting the criteria of the Ameri-

can National Standard “Automotive Lifts Safety Requirements for Construction, Testing, and Valida-

tion” ANSI/ALI

• ALCTV-2011, and that I will be responsible for all charges related to any special regional structural

and/or seismic anchoring requirements speciﬁed by any other agencies and/or codes such as the

Uniform Building Code (UBC) and/or International Building Code (IBC).