Full Product Manual

FOR TECHNICAL QUESTIONS, CALL [phone]
31
OPERATIONAL TEST PROCEEDURE
◊ Load vehicle as per diagram below using the ALI lifting points guide provided.
◊ Raise vehicle approximately 6" - 12" off the ground and check for stability.
◊ Visually inspect for leaks and ensure that all operating components are secure.
◊ Raise vehicle to the desired locking point and lower the lift on to the lock and relieve the hydraulic
pressure.
◊ Raise the vehicle off the locks, allow clearance for the safety lock to clear the locking block on the
carriage.
◊ Ensure that both locks release before descending.
◊ Lower vehicle until all 4 arm restraint gears are completely released.
◊ Reference ANSI/ALI ALIS for all safety data.