Full Product Manual

VISIT US ON THE WEB AT WWW.DANNMAR.COM26
REQUIRED MONTHLY MAINTENANCE
Check all arm adjusting locks for proper operation.
Check all cables connections, bolts and pins to insure proper mounting and torque.
Visually inspect safety locks for proper operation.
Lubricate columns with white lithium grease.
Inspect all anchors bolts and retighten if necessary.
Check all columns for squared and plumb.
Inspect all pivot arms pins making sure they are properly secure.
Check equalizer cable tension, and adjust if necessary.
1. Never use lift if cement anchor bolts are loose or any component of the lift is found to be defective.
2. Never operate lift if any person or equipment is below the vehicle.
3. Never exceed the rated lift capacity.
4. Ensure the safety locks are engaged before any attempt is made to work on or near the vehicle.
5. Never leave lift in elevated position unless the safety locks are engaged.
6. Do not permit electric motor to get wet! Motor damage caused by dampness is not covered under
warranty.
NEVER LIFT ANY VEHICLE IN ANY MANNER WITH
LESS THE ALL FOUR (4) ARMS. RATED CAPACITY OF
EACH LIFT ARM IS NO GREATER THAT ONE FOURTH
(1/4) OF THE OVERALL LIFT CAPACITY.
WARNING