Product Manual

Chalk line

Use the edge of the base plate to

line up the posts along the chalk line

Sport compacts

105 - 115 Typical

Mid size

110 - 120 Typical

Light duty / sport trucks

115 - 120 Typical

Full size trucks

120 - 13

Typical

STEP 5

( SITE LAYOUT )

D

D

AG

2. Once a location is determined, use a carpenters chalk line to layout a grid for the post locations. Keep

all dimensions and squareness within 1/8 or malfunctioning of the lift can occur.

3. After the post locations are properly marked, use a chalk or crayon to make an outline of the columns

on the ﬂoor at each location using the post base plates as a template.

4. Double check all dimensions and make sure that the layout is perfectly square.

Note: Wide or narrow installation is possible. The lift can be installed at a width that suits the vehicles you

will be raising. You may even choose to install additional anchors at varied column positions for adaptabil-

ity to multiple vehicle conﬁgurations.

R