Technical data

Outputs test mode
Frequency outputs test
The Daniel 3810 Series Liquid Ultrasonic Flow Meter provides a mode of operation for
individually testing the frequency output signal pairs. Entering, configuring, and exiting
this mode is accomplished by setting data points using the Daniel MeterLink Tools -
Outputs Test screen.
Outputs testFigure 4-12:
The Outputs Test dialog box allows you to monitor the live values of all the frequency,
current (analog) and digital outputs. Additionally the outputs can be set into a Test mode
to force the outputs to a specific user defined value. This dialog box is only available while
connected to a meter.
When the dialog box first opens, the available Outputs show the current “Live” values the
outputs are driving. The LED Test mode will remain gray while not in Test mode.
Daniel Liquid Ultrasonic Flow Meters calibration and configuration parameters
50 Daniel 3810 Series Operations Manual