Technical data

State gated, active high:Figure 4-5:
State gated, active low:Figure 4-6:
4. Click OK to apply the selected parameters.
A Microsoft Excel
®
file is generated and the calibration log report can be saved or
appended to an existing file.
5.
Click Cancel to close the dialog box without making changes. If you made changes,
click the Write to apply the changes.
6. After the flow calibration parameters are configured, set the WRITE PROT. switch on
the CPU Module to the ON position to write-protect the configuration.
Daniel Liquid Ultrasonic Flow Meters calibration and configuration parameters
Operations 37