Technical data

6 Tools commands utility
The Daniel MeterLink Tools menu commands provides the following utilities for the meter’s
health status, monitoring operational conditions, the meter’s flow characteristics,
updating the meter’s program components and monitoring communications between
Daniel MeterLink and the meter.
6.1 Tools commands utility
The Daniel MeterLink Tools menu commands provides the following utilities for the meter’s
health status, monitoring operational conditions, the meter’s flow characteristics,
updating the meter’s program components and monitoring communications between
Daniel MeterLink and the meter.
6.1.1 Tools menu
Daniel MeterLink Tools commands menu
Tools menu commandsTable 6-1:
Edit/Compare Configuration
Open, edit, and compare configurations from files and
meters
Edit/Compare Configuration Open, edit, and compare configurations from files and me-
ters.
Waveform Viewer Collect, view, save, print ultrasonic waveforms from meter or
file.
Gas SOS Calculator Calculate speed of sound for a known gas composition.
Outputs Test Test frequency, current, and digital outputs by fixing them to
a set value.
Transducer Swap-Out Adjust path length parameters when changing out transduc-
ers, stalks, holders, or mounts.
Set Baseline Wizard Establishes the baseline for the meter's flow characteristics
that can be used to monitor the heath of the meter run using
Continuous Flow Analysis features.
Program Download Upgrade the program components in Daniel Ultrasonic me-
ters.
Communications Analyzer Monitor communications between Daniel MeterLink and a
meter
6.1.2 Edit/Compare Configuration parameters
Tools menu command
Tools commands utility
Operations 97