Safety & Maintenance Instructions
FREEDOM. PASSION. PRECISION.
™
FIRE CONDITION AND IS EXTREMELY DANGEROUS. FIREARMS CAN EASILY
BE ACCIDENTALLY DISCHARGED, CAUSING INJURY, DEATH, OR DAMAGE TO
PROPERTY.
WARNING: THIS FIREARM MAY DISCHARGE ACCIDENTALLY WHEN A ROUND
IS FED INTO THE CHAMBER IF IT IS DROPPED OR RECEIVES A BLOW TO THE
MUZZLE OR FRONT OF THE FIREARM (THIS CAN OCCUR REGARDLESS OF
THE POSITION OF THE HAMMER OR ANY OF THE VARIOUS SAFETY DEVICES).
THEREFORE, EXTRA CARE AND STRICT ADHERENCE TO THESE INSTRUCTIONS
BY THE FIREARM’S USER IS MANDATORY FOR MINIMIZING THE RISK OF
ACCIDENTS.
4.8
UNLOADING
WARNING: ALWAYS UNLOAD YOUR FIREARM IMMEDIATELY AFTER USE AND
PRIOR TO CLEANING AND STORAGE TO MINIMIZE THE RISK OF ACCIDENTAL
DISCHARGE.
TO UNLOAD:
IMPORTANT: READ SAFETY INSTRUCTIONS. KEEP YOUR FIREARM POINTING
IN A SAFE DIRECTION. DO NOT TOUCH THE TRIGGER AND KEEP HANDS AWAY
FROM THE EJECTION PORT.
1. Set the safety selector lever to “SAFE.”
Note: The hammer must be cocked to place this rearm on “SAFE.”
2. Press the magazine catch and remove the magazine.
3. Pull the charging handle to the rear and push in lower portion of bolt catch.
If a round was in the chamber, it should have been ejected. If the last round
was red, the bolt carrier group should already be locked to the rear provided
a magazine was in place.
4. Look into the chamber through the ejection port to make sure the chamber
is empty.
5. When the magazine is removed and the chamber is empty, push the top
portion of the bolt catch to allow the bolt carrier group to return forward.