Safety & Maintenance Instructions

DDM4
®
/ DD5
®
MANUAL P 9
of the trigger, blocking the sear surface of the trigger and preventing the hammer from
being released.
When set to “SEMI,” the rearm will re a single shot each time the trigger is squeezed
without manually reloading.
Daniel Defense
®
Full Auto Firearm
Some law enforcement and military platforms feature a three-position safety selector,
“SAFE,” “SEMI,” and a third position for fully automatic.
When set to “SAFE,” a cam bears upon the rear portion of the trigger, blocking the
sear surface of the trigger and preventing the hammer from being released.
When set to “SEMI,” the rearm will re a single shot each time the trigger is squeezed
without manually reloading.
When set to the third position, “AUTO,” the rearm will re continuously until either the
trigger is released or the magazine is empty.
NOTE: The safety featured on Daniel Defense rearms is a mechanical safeguard.
As with all mechanical systems, failures within this system are possible and may
not be visible to the operator. Activating the safety selector lever to the “SAFE”
position does not mean the rearm is incapable of ring if mishandled or dropped.
SAFE (DDM4)
SAFE (DD5)
SEMI (DDM4)
SEMI (DD5)
SEMI AUTO