User Manual

5
2. ACME THREAD QUICK-CLAMPING
SYSTEM QUICK REFERENCE
OPEN: Rotate collar until it stops on the at faces of the lock tabs.
(FIGURE 1)
ATTACH: Thread suppressor onto muzzle device adapter until
clamps snap over the retaining ange on the muzzle device (you
may feel some resistance, this is normal) and the suppressor is
secured tightly.
LOCK: Tighten locking collar against the locking tabs on the
suppressor core. (FIGURE 2)
VERIFY: Attempt to rotate suppressor; only slight rotational
movement under tension should be felt. Slight rotation is normal,
with the clamps retaining the suppressor against the locating
taper on the muzzle device.
Attempt to remove suppressor by aggressively pulling/twisting
suppressor forward. When attached correctly, the suppressor will
have no forward movement and minimal rotational movement
under tension.
Installation of Daniel Defense DD WAVE Sound Suppressor
is now complete.
3. INCLUDED COMPONENTS
< Suppressor
< Muzzle Device Adapter
< Alignment Washer
< Shim Kit
< Rocksett
< Manual
4. MUZZLE DEVICE ADAPTER
INSTALLATION PROCEDURES WARNING
First remove live ammunition from your work area.
Always ensure the rearm is not loaded before
performing any work procedures.
Practice safe handling of rearms at all times.
Refer to your weapon’s manual for weapon safety
features and handling instructions.
UNLOCKED LOCKED
FIGURE 1 FIGURE 2
DD
®
WAVE
®
properly installed